THE ADVENTURE BEGINS

Here's our story: In August of 2013 we began toying with the idea of dumping the house thing and moving into an RV fulltime to reduce living expenses. After all, it was just the two of us and the dogs living in a big two story house at the time and paying a huge payment just to store "STUFF". The other idea I had was to enable us to more money for retirement someday. Our Idea is to semi retire when Andy is around 62-64 and start work camping our way across the country. So! In April 2014 we found a really nice clean 1998 Newmar Mountain Aire 40ft diesel pusher with low miles, good tires and a Cummins 8.3L mechanical engine. They are great work horses and are almost trouble free. We added an 18 ft cargo trailer to pull behind to have a shop for Andy to do projects in and to have a place to keep our two Yamaha Quads and our Yamaha Motorcycle. Everything came together like it was ordained to and in May 2014 we moved into it. I was a bit worried about my head clearance but after a week I was really settled in and comfortable. And the name? Well my wife remarked one day as we drove in the park. "It looks like a shuttle craft from Star Trek", so our nickname for it is "Galileo 7" and it stuck...So begins our adventures...watch and listen for us on the road ways and on the air waves on 146.52 simplex since were also Ham Operators. Enjoy our posts and feel free to comment.... 73's Andy & Becky - W7ATR & N7SYC



Thursday, December 18, 2014

Merry Christmas 2014 - God Bless Us, Every One....

Merry Christmas 2014 from The Rustens - Andy and Becky and of course Pretzel and Opal. We found a tree to fit on my latest creation , the steering wheel table top. So here it is, all decorated up and with presents underneath. What do you all think ?




Tuesday, December 16, 2014

Things you can do with a 85% useless steering wheel...

How is a steering wheel 85% useless you say? Well think about it... you drive it for a few hours to your next destination, then you stare at it for the next 2-3 months at a time. That could be classed as  useless most places, couldn't it?... What inspired me to do this was two things, First a lack of anywhere to put a book, drink, tv remote, etc, when sitting in one of the captains chairs up front, And second, a recent photo and story in the RV Village web site got the Admiral (Becky) inspired and put me into action. Years back when remodeling our kitchens in our floating home, I saved a piece of Formica covered counter top for later use because it was just to good to throw away. For this project, it would be perfect.
     First I measured the diameter of the steering wheel which was 18 inches, so I decided to make the table top 19 inches in diameter. Next I used a nail and a pencil on a string to draw a circle on the bottom of my counter top piece and then used a band saw to cut out the circle. Then I moved the tilt steering wheel to its forward most position. I then took the round top and placed it on the wheel, and using a small level, determined how tall my back piece needed to be to make it level. I cut a small chunk of 2x4 wood and using (2) small "L" brackets secured it to the bottom with screws. Next for the front part, I used a piece of 1-1/4 PVC pipe about 3 inches long. I cut a slice length ways out of it, just wide enough to allow the steering wheel to fit into it snug. Drilled a couple small holes in it and setting it at a slight angle, screwed it to the bottom of the circle. Last I used (2) 8" strips of velcro to snugly secure the back 2x4 to the steering wheel as shown. The result? A nice secure table top for use. The Admiral says it will be a perfect spot for a small Christmas tree. Tis the Season !








Saturday, December 13, 2014

Blue Ox RV Park - Albany, Oregon : Our new home....

Well, the time finally came to leave Becky's moms place and head to Albany. Our application was all approved, background checks done and we picked out a spot they had open in the back of the park, if only for temporary till a bigger one came available. After a few visits to the park tho over a three week period, we spotted a long term parking spot open near the fence and not too far from the main entrance. We checked at the office and it was indeed available. Nice and long too. Plenty of room for the Galileo and its trailer. And beside it, parking for my work truck and Becky's Jeep. So away we went and got all settled in, everything fit perfectly. So here we are, at what I hope to be a long time spot in the beautiful southern Willamette Valley in Albany, Oregon. Close to kids, grand kids and parents alike. Only 40 minutes to the store I will work at and right at the top most area of my new territory. Happy Holidays from the Rusten's...




Sunday, December 7, 2014

"...Junk is the stuff we throw away... Stuff is the junk we keep..."


I have for a long time intended to put shelves in the trailer we pull to get it more organized and get the stuff off of the floor. Yesterday we ventured downtown Albany and went over to Burchams Metal Yard . I was looking for metal to build and weld together shelving and we came across 3 shelves in the back of the yard like retail stores use to hold bulk items on shelves. Ive used many like this over the years in the parts departments Ive worked in.. We dug thru another pile of metal and found three brackets that these shelves would latch on to. We lucked out indeed. Put the whole mess on the scale and 43# at .40 cents a pound later we were on the way home. I mounted them using self drilling screws to the main beam running at the top of the trailer wall frame and put a piece of channel down below for support since my trailer has 16 inch centers for studding and  my shelves were 48". All in all i'm very happy with the way it came out. Here are a couple photos. Also got my stereo hooked up that I took out of my boat. So classic rock and roll prevailed thru the afternoon.




Sunday, November 30, 2014

Convert Fluorescent Lights To LED Dual Use (or single)

This is a link to a simply awesome article on how to convert your 18 inch flourescent lamps in your motorhome or trailer to LED. I have looked thru several sites on buying kits that range between $30 and $75 per fixture, if you can handle a pencil soldering iron, this will show you how to buy a strip of 16.4 ft of LED strip lights which you can cut into strips and stick in place of the tubes for about $2 per fixture plus your wiring and enjoy the lights and the power savings in your unit.

Convert Fluorescent Lights To LED Dual Use

http://www.thewanderman.com/2012/05/convert-fluorescent-lights-to-led-dual.html

When not to fix a broken furnace

Aw, its a nice balmy 26 degrees this morning here in Marion, Oregon. Perfect time to finally fix that furnace I talked about couple weeks back and have been putting off. I had suspected a bearing going out in the blower motor unit, but it just didnt quite sound like a bearing. It didnt squeek... So today, its kinda cold ya know, Ill just turn it on for a few minutes to warm up the MH and then turn on the space heaters later.... Hoo Wee, yup, it wasn't a bearing after all. It was an "out of balance" situation, you know, the kind you get when your washer or dryer has a load on one side, but not the other??..... Did I mention hoo wee !! It stinks !!! It was a dead deer mouse in the blower fan... poor little guy probably kept up the first few dozen rev's, but then gravity took over... He was half way thru the blades on the squirrel cage. (they call those that for a reason ya know)... So out came the whole furnace out the side of the MH and over to the shop to be taken apart. Now I pause here for a moment to reflect that when one is taking apart these RV furnaces that are put together by 12 inch tall Chinese. It goes to say there are probably a few screws your going to say "How the heck did they get that in there??"... a few thousand sheet metal screws later and i reached his nest down in the fire chamber. Cleaned it out, several sprays of bleach water and some 409 cleaner and back togwther it went. Stuffed it back in the hole, hooked up the gas and wiring, and what do ya know. It works...We have lots of heat again..... Oh, and we held a funeral for the mouse...

.